LivingCell™ – ThermoCoin™

	Temperature losses, recovery times and pH changes are drastically reduced when using the ThermoCoin™ to achieve thermal stability. The heat conducting ThermoCoin™ provides direct contact between the heated surface and the buttom of the culture dish.
- Reducing drastic temperature losses    when used on a heated surface - Reducing temperature recovery time    when used inside an incubator - Minimizing changes in the pH by    providing thermal stability
	Using the ThermoCoin™ on a heated surface. Place a number of the LivingCell ThermoCoin™ on any heated surface used when working in vitro with living cells. The direct heat contact results in optimal thermal control and prevents temperature losses of more than 5ºC when a culture dish placed 5 minutes on a 37ºC warm surface in a laminar cabinet. Using the ThermoCoin™ Inside an incubator. Place a number of the LivingCell™ ThermoCoins™ inside any cell culture incubator. The culture dish should then be placed on top of the ThermoCoins™ to obtain a direct heat contact when returning the culture dish to the incubator. A culture dish with culture media will thus recover any temperature loss much faster due to the direct heat contact.
LivingCell™ ThermoCoin™: Type Description Dimensions TC-4W TC-60 TC-1006 TC-35 ThermoCoin for Nunc 4-well dish ThermoCoin for Ø 60 mm dish ThermoCoin for Falcon 1006 ICSI dish ThermoCoin for Ø 35 mm dish 60x60 mm Ø 50 mm Ø 45 mm Ø 32 mm		Technical request: support@mtg-de.com Manufacturer´s website: www.LivingCell.com